GZ/Cable set-6M - Six Metres With 5 Plugs from Garden Zone
Garden Zone: Many of the Garden Zone fittings use the low voltage 12 volt 'plug & go' system which allows a large number of fittings to be connected together over a distance of up to 50 metres.
Therefore additional LED drivers & cable sets may need to be purchased in order to use these fittings effectively.
Please note that the 'plug & go' fittings use a unique single pin 2 pole plug and as such are not compatible with any other product or system. 6 metre cable set for plug & go fittings - 6 metres long with 5 plugs spaced 1 metre apart for up to 5 fittings.ﾠ
- 6 metre cable
- 5 plugs
- 1 metre spacing
- Plug & Go Guide:
- Step 1: Choose the areas you want to have lit then we suggest that you sketch a rough plan view of each area involved
- Step 2: Choose the fittings which will suit the requirements and list them out with the quantity of each where relevant. Be careful to bear in mind the voltage of the fittings chosen. All Plug & Go models just need to be connected into the low voltage cable
- Step 3: Measure the distance involved for the Plug & Go models chosen and determine from the cable set options available which cable set or sets will be needed. Remember up to 50 metres of cable can be used from 1 LED driver but the wattage loading must not exceed the recommended minimum maximum.
- Step 4: Plan where the mains supply will originate from. With the Plug & Go system you have a choice of placing the LED driver/drivers in an IP rated wall box on an exterior wall. However depending on how large an area is involved sometimes more than one mains feed may be needed in different locations. Consultation with an electrician is advisable on this matter.
SIZE - all sizes are guides only
- 6 metres
- GZ/Cable set-6M
|On Display in Showroom||No|
|Brand||Garden Zone Lights|
|Part No||GZ/Cable set-6Metre|